A question and advise request

[Selin Ece Bozkurt, Radore]

Thanks for your reply.

I applied the following command you sent. If successful or not, I will inform you.

-----Original Message-----
From: arguslist-bounces at tcp4me.com [mailto:arguslist-bounces at tcp4me.com] On Behalf Of scott at hiemstra.us
Sent: Thursday, July 21, 2016 9:05 PM
To: Discussion about Argus
Subject: Re: A question and advise request

You could take it one step further by adding the current value to the message with something like this.

         messagedn:XMR02-TTI-TRAFFIC %r - Current Rate: %v

Scott

On 2016-07-21 14:01, scott at hiemstra.us wrote:
> Selin,
> 
> I'm not sure if what you specifically asked is possible, the author or 
> someone else may chime in and say otherwise.  This doesn't meet your 
> goal exactly but it should at least let you get your point across in 
> the notification.  This will cause your notification to say either 
> "XMR02-TTI-TRAFFIC SNMP TEST less than min" OR "XMR02-TTI-TRAFFIC SNMP 
> TEST more than max" depending on what failed.
> 
> Service UDP/SNMP {
> 	label:XMR02-TTI-IN
> 	calc:ave-rate-bits
> 	hostname:31.210.9.186
> 	oid:.1.3.6.1.2.1.31.1.1.1.6.5
> 	community:RH
> 	snmpversion:2c
> 	autoack:no
> 	maxvalue:500000000
> 	minvalue:100000000
> 	messagedn:XMR02-TTI-TRAFFIC %r
> 	messageup:XMR02-TTI-TRAFFIC-NORMAL
> 
> 	notify:         mail:selin.bozkurt at radore.com
> 	escalate: 10 notify:         mail:selin.bozkurt at radore.com
> }
> 
> Let me know if it helps,
> Scott
> 
> 
> 
> 
> On 2016-07-21 08:42, Selin Ece Bozkurt, Radore wrote:
>> Hello,
>> 
>> 
>> Given configuration is below:
>> 
>>         Service UDP/SNMP {
>>         label:XMR02-TTI-IN
>>         calc:ave-rate-bits
>>         hostname:31.210.9.186
>>         oid:.1.3.6.1.2.1.31.1.1.1.6.5
>>         community:RH
>>         snmpversion:2c
>>         autoack:no
>>         maxvalue:500000000
>>         messagedn:XMR02-TTI-ATTACK-ABOVE-500Mb
>>         messageup:XMR02-TTI-ATTACK-END
>>         minvalue:100000000
>>         messagedn:XMR02-TTI-TRAFFIC-DECREASE-UNDER-100Mb
>>         messageup:XMR02-TTI-TRAFFIC-NORMAL
>> 
>>         notify:         mail:selin.bozkurt at radore.com
>>         escalate: 10 notify:         mail:selin.bozkurt at radore.com
>>         }
>> 
>> It is able to send email for bold parts ( for maxvalue conditions)
>> 
>> However, I want to identify yet another messageup and messagedn texts 
>> for minvalue for download traffic decrease under the same service 
>> above.
>> Since the code hasn't got if-else structure , I couldn't do this. So 
>> this situation may lead complexity.
>> Is there any way to do such a thing? ( It will send a separate mail 
>> for maxvalue and yet another separate mail for minvalue)
>> 
>> Very thanks,
>> 
>> 
>> Saygılarımla,
>> Selin Ece Bozkurt
>> Ağ Operasyon Merkezi
>> Uzman Yrd.
>> 
>> Network Operations Center
>> Asst. Specialist
>> 
>> RADORE
>> Metrocity AVM Levent, İstanbul - TÜRKİYE
>> T: 0212 344 04 04
>> http://www.radore.com<http://www.radore.com/>
>> 
>> 
>> [Radore] <http://www.radore.com/startup>
>> 
>> RADORE VERİ MERKEZİ HİZMETLERİ A.Ş.
>> _______________________________________________
>> http://argus.tcp4me.com/
>> Arguslist at tcp4me.com
>> http://www.tcp4me.com/mailman/listinfo/arguslist
> _______________________________________________
> http://argus.tcp4me.com/
> Arguslist at tcp4me.com
> http://www.tcp4me.com/mailman/listinfo/arguslist
_______________________________________________
http://argus.tcp4me.com/
Arguslist at tcp4me.com
http://www.tcp4me.com/mailman/listinfo/arguslist